The EPEVER Tracer AN Sequence Solar Cost Controller is often a highly economical solar controller made for off-grid solar programs. Determined by multiphase synchronous rectification engineering, it makes certain optimized Vitality conversion and method security for a wide range of photovoltaic (PV) apps.
Important Capabilities with the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Photo voltaic Charge Controller technological know-how for outstanding photo voltaic Electrical power harvesting. Important options include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Superior MPPT Algorithm with >ninety nine% performance.
Dual-Phase Charging for enhanced battery daily life.
Liquid crystal display Show with authentic-time data monitoring.
Numerous Load Handle Modes like handbook and timer.
Comprehensive Electronic Protections towards overcharging, more than-discharging, quick circuits, and reverse polarity.
Phase-by-Phase Tutorial to Creating the EPEVER Tracer AN Sequence Controller
one. Unboxing and Planning the Controller
Assure all parts are involved: Tracer AN device, temperature sensor, interaction cables, and person handbook.
Validate the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Cost Controller
Pick a effectively-ventilated, dry place near the battery lender.
Protected the Tracer AN controller utilizing the delivered mounting brackets.
Maintain correct clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Caution: Often comply with appropriate security protocols and make sure the technique is run off prior to connecting components.
Step 1: Connect the battery terminals into the charge controller (optimistic to optimistic, damaging to damaging).
Phase two: Join the photo voltaic panel array for the PV input terminals.
Move 3: Link the load terminals if utilizing a immediate load connection.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity within the controller by connecting the battery initially.
Use the Liquid crystal display display to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Command.
five. Monitoring and Details Logging
The Tracer AN Series supports real-time monitoring utilizing the MT50 distant meter.
Knowledge may be logged by using the RS485 interaction port employing software including Solar Station Computer system.
Remote checking can be done Together with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Issue one: No Power Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern 2: About-Voltage Safety
Confirm the photo voltaic array’s voltage rating.
Change system parameters if needed.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT settings inside the menu.
Great things about the Tracer AN Series with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Better Effectiveness: Minimized Vitality losses for the duration of conversion.
Improved Reliability: Steady functionality less than variable loads.
For a longer time Battery Everyday living: Constant and accurate charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification know-how can be an exceptional choice for optimizing solar power generation and extending battery everyday living. By adhering to the above mentioned setup tutorial, users Read more can guarantee most performance and system longevity.