The EPEVER Tracer AN Series Photo voltaic Cost Controller is usually a remarkably efficient solar controller created for off-grid photo voltaic devices. Based on multiphase synchronous rectification know-how, it makes certain optimized energy conversion and system stability for a variety of photovoltaic (PV) programs.
Essential Capabilities with the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Cost Controller know-how for remarkable photo voltaic Electricity harvesting. Critical options incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for Increased battery everyday living.
Liquid crystal display Screen with serious-time data monitoring.
Several Load Manage Modes like handbook and timer.
In depth Electronic Protections against overcharging, over-discharging, small circuits, and reverse polarity.
Phase-by-Phase Guidebook to Starting the EPEVER Tracer AN Sequence Controller
one. Unboxing and Making ready the Controller
Ensure all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person handbook.
Verify the design variety and voltage ratings match your photo voltaic panel and battery requirements.
2. Mounting the Charge Controller
Select a properly-ventilated, dry area near the battery financial institution.
Protected the Tracer AN controller using the provided mounting brackets.
Keep proper clearance for heat dissipation.
3. Wiring the Solar Cost Controller
Warning: Always adhere to suitable safety protocols and ensure the method is powered off prior to connecting elements.
Move 1: Hook up the battery terminals for the charge controller (optimistic to good, damaging to damaging).
Phase 2: Link the solar panel array to the PV input terminals.
Step three: Join the load terminals if employing a direct load connection.
Step 4: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Options
Ability over the controller by connecting the battery to start with.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Handbook, timer, gentle Management.
5. Checking and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information can be logged through the RS485 conversation port utilizing software package which include Solar Station Computer system.
Distant monitoring is possible While using the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Concern one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change system parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT options during the menu.
Benefits of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Higher Effectiveness: Lessened Vitality losses all through conversion.
Enhanced Reliability: Steady general performance under variable masses.
For a longer period Battery Lifestyle: Regular and precise charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase Click Here synchronous rectification technological know-how is definitely an Excellent choice for optimizing solar power technology and extending battery existence. By pursuing the above mentioned set up manual, users can make sure utmost effectiveness and program longevity.