The EPEVER Tracer AN Collection Solar Charge Controller is often a highly productive solar controller created for off-grid photo voltaic devices. Based on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller technological innovation for excellent photo voltaic Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Stage Charging for Improved battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Stage Guidebook to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Be certain all parts are involved: Tracer AN device, temperature sensor, interaction cables, and person guide.
Verify the model variety and voltage rankings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry place near the battery lender.
Protected the Tracer AN controller utilizing the presented mounting brackets.
Sustain correct clearance for warmth dissipation.
three. Wiring the Solar Charge Controller
Caution: Constantly comply with suitable security protocols and ensure the method is powered off in advance of connecting components.
Step one: Hook up the battery terminals towards the charge controller (favourable to constructive, damaging to negative).
Action two: Connect the photo voltaic panel array to your PV enter terminals.
Phase 3: Hook up the load terminals if utilizing a direct load relationship.
Phase 4: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery first.
Utilize the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Command.
5. Checking and Knowledge Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Details is often logged through the RS485 interaction port employing software program such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Prevalent Concerns
Difficulty 1: More info No Ability Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: In excess of-Voltage Protection
Confirm the photo voltaic array’s voltage rating.
Regulate method parameters if vital.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how assures:
Bigger Effectiveness: Minimized Power losses through conversion.
Enhanced Dependability: Secure overall performance underneath variable loads.
More time Battery Everyday living: Steady and precise charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar power technology and extending battery lifetime. By subsequent the above mentioned setup guidebook, people can ensure highest performance and system longevity.